Dodge Charger Push Button: Troubleshooting Won'T Start Issue (2024)

Is your Dodge Charger refusing to start when you press the button? Don’t worry, we’ve got you covered! In this article, we’ll delve into the frustrating issue of a Dodge Charger not starting with the push button and provide you with simple yet effective solutions. Whether you’re a car enthusiast or a regular driver, dealing with a non-responsive push button can be a real headache. But fear not, because we’re here to help you navigate through this problem and get your Dodge Charger up and running again. So, let’s dive right in and find out why your Dodge Charger won’t start with the push button!

Dodge Charger Push Button: Troubleshooting Won'T Start Issue (1)

Dodge Charger Won’t Start Push Button: Troubleshooting Guide

Introduction

The Dodge Charger is a powerful and popular vehicle known for its performance and sleek design. However, encountering issues with starting the vehicle using the push-button ignition system can be frustrating. If your Dodge Charger won’t start with the push button, there are several potential reasons for this problem. This comprehensive troubleshooting guide will explore common issues and provide step-by-step solutions to get your Dodge Charger up and running again.

Understanding the Push Button Ignition System

Before diving into troubleshooting, it’s important to have a basic understanding of how the push button ignition system in a Dodge Charger works. The push button ignition eliminates the need for a traditional key and ignition switch. When you press the start button, it sends a signal to the engine control unit (ECU), which then activates the starter motor to crank the engine. The ECU also controls the fuel injection and ignition systems, ensuring the engine runs smoothly. If there is an issue with any of these components or their associated systems, it can result in a no-start condition.

Step 1: Check the Key Fob Battery

One of the first things to check when your Dodge Charger won’t start with the push button is the key fob battery. A weak or dead battery in the key fob can prevent the ECU from receiving the signal to start the engine. Here’s how to check and replace the key fob battery:

  1. Locate the small release button on the back of the key fob.
  2. Press and hold the button, then slide the release switch to remove the emergency key.
  3. Use the emergency key to carefully pry open the key fob case.
  4. Remove the old battery and replace it with a new one of the same type (usually a CR2032 battery).
  5. Close the key fob case and press it back together until it clicks into place.

After replacing the key fob battery, try starting the Dodge Charger again to see if the issue is resolved.

Step 2: Verify the Gear Selector Position

In some cases, the Dodge Charger may not start if the gear selector is not in the correct position. The vehicle’s computer system has a safety feature that prevents the engine from starting in certain gear positions (e.g., Drive or Reverse). To ensure the gear selector is in the correct position, follow these steps:

  1. Make sure the parking brake is engaged and the transmission is in Park (P).
  2. Check that the gear indicator on the instrument cluster matches the selected gear.
  3. If necessary, move the gear selector to Park (P) again and firmly press the brake pedal.

Once the gear selector is verified to be in the correct position, attempt to start the Dodge Charger using the push button.

Step 3: Check for a Faulty Brake Pedal Switch

The Dodge Charger’s push button ignition system requires the brake pedal to be depressed before the engine can start. If the brake pedal switch is faulty or misaligned, it may not send the proper signal to the ECU, resulting in a no-start condition. To check the brake pedal switch, follow these steps:

  1. Locate the brake pedal switch under the dashboard, near the top of the brake pedal arm.
  2. Inspect the switch for any signs of damage or misalignment.
  3. If necessary, unplug the switch, clean the contacts, and reconnect it securely.
  4. Test the switch by pressing the brake pedal while observing the brake lights.

If the brake lights illuminate when the pedal is pressed, the switch is likely functioning correctly. If not, consider replacing the brake pedal switch.

Step 4: Check the Battery and Charging System

A weak or discharged battery can prevent the Dodge Charger from starting, even if the push button system appears to be functioning correctly. It’s essential to ensure the battery has sufficient charge and that the charging system is working properly. Follow these steps to check the battery and charging system:

  1. Using a voltmeter, measure the battery voltage. A fully charged battery should read around 12.6 volts.
  2. If the battery voltage is low, attempt to jump-start the Dodge Charger using jumper cables and another vehicle with a charged battery.
  3. Once started, allow the engine to run for at least 20 minutes to recharge the battery.
  4. If the battery fails to hold a charge or the charging system is not functioning correctly, consider replacing the battery or seeking professional assistance to diagnose and repair the charging system.

Step 5: Check for Faulty Ignition Switch or Control Module

If none of the previous steps have resolved the issue, there may be a problem with the ignition switch or the control module. These components are responsible for sending the necessary signals to start the engine. It’s recommended to have a qualified mechanic inspect and diagnose any potential issues with these components.

Step 6: Consult with a Professional Technician

If you have exhausted all troubleshooting steps and your Dodge Charger still won’t start with the push button, it is advisable to consult with a professional technician or contact your nearest Dodge dealership. They have the expertise and specialized tools to diagnose and resolve complex electrical issues.

Encountering a situation where your Dodge Charger won’t start with the push button can be frustrating, but with the help of this troubleshooting guide, you should be well-equipped to identify and resolve common issues. Remember to check the key fob battery, verify the gear selector position, inspect the brake pedal switch, and check the battery and charging system. If all else fails, seeking the assistance of a professional technician is the best course of action to get your Dodge Charger back on the road again.

Frequently Asked Questions

Please refer to the FAQ section for answers to common questions about troubleshooting a Dodge Charger that won’t start with the push button.

Dodge challenger won’t start? Quick and easy fix!!

Frequently Asked Questions

Why won’t my Dodge Charger start when using the push button?

There could be several reasons why your Dodge Charger won’t start when using the push button. Common causes include a dead battery, faulty ignition switch, issues with the brake pedal sensor, or a problem with the push button start system itself.

What should I do if my Dodge Charger doesn’t start with the push button?

If your Dodge Charger doesn’t start with the push button, there are a few troubleshooting steps you can try. Check if the battery is fully charged and in good condition. Ensure your foot is firmly on the brake pedal while pressing the start button. If the issue persists, it is recommended to have your vehicle inspected by a qualified mechanic.

Why is my Dodge Charger’s push button start not working even though the battery is charged?

Even if the battery is charged, the push button start system may still malfunction due to a faulty ignition switch or a problem with the brake pedal sensor. These components play a crucial role in enabling the push button start function. It is advisable to have a professional diagnose and repair the issue.

Can a dead key fob battery prevent the push button start from working in my Dodge Charger?

Yes, a dead key fob battery can prevent the push button start from working in your Dodge Charger. The key fob communicates with the car’s system to allow the push button start to function. If the key fob battery is dead, replace it with a new one and try starting your vehicle again.

Are there any recalls or known issues related to the push button start in Dodge Chargers?

While there have been occasional reports of push button start issues in Dodge Chargers, there are no widespread recalls specifically related to this problem. If you are experiencing difficulties with your push button start, it is best to consult with a Dodge dealership or an authorized service center for assistance.

Final Thoughts

If your Dodge Charger won’t start with the push button, there are a few possible causes to consider. The issue could be related to a dead battery, a faulty ignition switch, a problem with the starter motor, or a malfunctioning push button itself. To determine the exact cause, it is important to diagnose and troubleshoot the problem. Start by checking the battery to ensure it has enough charge, then inspect the ignition switch and starter motor for any signs of damage or malfunction. If the issue persists, it is recommended to consult a professional mechanic for further assistance with your Dodge Charger won’t start push button problem.

Dodge Charger Push Button: Troubleshooting Won'T Start Issue (2024)

References

Top Articles
Latest Posts
Article information

Author: Cheryll Lueilwitz

Last Updated:

Views: 5664

Rating: 4.3 / 5 (74 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Cheryll Lueilwitz

Birthday: 1997-12-23

Address: 4653 O'Kon Hill, Lake Juanstad, AR 65469

Phone: +494124489301

Job: Marketing Representative

Hobby: Reading, Ice skating, Foraging, BASE jumping, Hiking, Skateboarding, Kayaking

Introduction: My name is Cheryll Lueilwitz, I am a sparkling, clean, super, lucky, joyous, outstanding, lucky person who loves writing and wants to share my knowledge and understanding with you.