- parametric-filter Amplifiers
- parametric-filter Audio
- parametric-filter Battery management ICs
- parametric-filter
- parametric-filter DLP products
- parametric-filter Data converters
- parametric-filter
- parametric-filter Interface
- parametric-filter Isolation
- parametric-filter
- parametric-filter
- parametric-filter Motor drivers
- parametric-filter Power management
- parametric-filter
- parametric-filter Sensors
- parametric-filter
- parametric-filter Wireless connectivity
- parametric-filter Digital isolators
- parametric-filter Isolated ADCs
- parametric-filter Isolated amplifiers
- parametric-filter Isolated comparators
- parametric-filter Isolated interface ICs
- parametric-filter Opto-emulators
- parametric-filter Power for signal isolators
Home
Isolation
Isolated comparators
Dual, fast-response, reinforced, isolated window comparator with adjustable threshold
Data sheet
- document-pdfAcrobat AMC23C14 Dual, Fast Response, Reinforced Isolated Window Comparator With Adjustable Threshold datasheet (Rev. A) PDF | HTML
AMC23C14
Product details
- Wide high-side supply range: 3 V to 27 V
- Low-side supply range: 2.7 V to 5.5 V
- Dual window comparator:
- Window comparator 1: ±20-mV to ±300-mV adjustable threshold
- Window comparator 2: ±300-mV fixed threshold
- Supports positive-comparator mode:
- Cmp0: 600-mV to 2.7-V adjustable threshold
- Cmp2: 300-mV fixed threshold
- Cmp1 and Cmp3: Disabled
- Reference for threshold adjustment: 100 µA, ±2%
- Trip threshold error: ±1% (max) at 250 mV
- Open-drain outputs
- Propagation delay: 280 ns (typ)
- High CMTI: 15 V/ns (min)
- Safety-related certifications:
- 7000-VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 5000-VRMS isolation for 1 minute per UL1577
- Fully specified over the extended industrial temperature range: –40°C to +125°C
- Wide high-side supply range: 3 V to 27 V
- Low-side supply range: 2.7 V to 5.5 V
- Dual window comparator:
- Window comparator 1: ±20-mV to ±300-mV adjustable threshold
- Window comparator 2: ±300-mV fixed threshold
- Supports positive-comparator mode:
- Cmp0: 600-mV to 2.7-V adjustable threshold
- Cmp2: 300-mV fixed threshold
- Cmp1 and Cmp3: Disabled
- Reference for threshold adjustment: 100 µA, ±2%
- Trip threshold error: ±1% (max) at 250 mV
- Open-drain outputs
- Propagation delay: 280 ns (typ)
- High CMTI: 15 V/ns (min)
- Safety-related certifications:
- 7000-VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 5000-VRMS isolation for 1 minute per UL1577
- Fully specified over the extended industrial temperature range: –40°C to +125°C
The AMC23C14 is a dual, isolated window comparator with a short response time. The open-drain outputs are separated from the input circuitry by an isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced galvanic isolation of up to 5 kVRMS according to VDE 0884-17 and UL1577, and supports a working voltage of up to 1 kVPK.
Both comparators have windows that are centered around 0 V, meaning that the comparators trip if the input exceeds the thresholds in a positive or negative direction. One comparator has fixed thresholds of ±300 mV. The second comparator has adjustable thresholds from ±20 mV to ±300 mV through a single external resistor.
The AMC23C14 also supports a positive-comparator only mode. When the voltage on the REF pin is greater than 550 mV, the negative comparators are disabled and only the positive comparators are functional. The reference voltage in this mode can be as high as 2.7 V. This mode is particularly useful for monitoring positive voltage supplies.
The AMC23C14 is available in an 8-pin, wide-body SOIC package and is specified over the extended industrial temperature range of –40°C to +125°C.
The AMC23C14 is a dual, isolated window comparator with a short response time. The open-drain outputs are separated from the input circuitry by an isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced galvanic isolation of up to 5 kVRMS according to VDE 0884-17 and UL1577, and supports a working voltage of up to 1 kVPK.
Both comparators have windows that are centered around 0 V, meaning that the comparators trip if the input exceeds the thresholds in a positive or negative direction. One comparator has fixed thresholds of ±300 mV. The second comparator has adjustable thresholds from ±20 mV to ±300 mV through a single external resistor.
The AMC23C14 also supports a positive-comparator only mode. When the voltage on the REF pin is greater than 550 mV, the negative comparators are disabled and only the positive comparators are functional. The reference voltage in this mode can be as high as 2.7 V. This mode is particularly useful for monitoring positive voltage supplies.
The AMC23C14 is available in an 8-pin, wide-body SOIC package and is specified over the extended industrial temperature range of –40°C to +125°C.
filter Find other Isolated comparators
Similar products you might be interested in
Compare alternates
Pin-for-pin with same functionality to the compared device
Technical documentation
No results found. Please clear your search and try again.
View all 9Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | AMC23C14 Dual, Fast Response, Reinforced Isolated Window Comparator With Adjustable Threshold datasheet (Rev. A) | PDF | HTML | 14 Jul 2022 |
Certificate | VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. S) | 29 Feb 2024 | ||
Application brief | Utilizing AMC3311 to Power AMC23C11 for Isolated Sensing and Fault Detection | PDF | HTML | 09 Nov 2023 | |
Certificate | UL Certificate of Compliance Vol4 Sec5 E181974 (Rev. A) | 23 Jan 2023 | ||
Application note | Design Considerations for Current Sensing in DC EV Charging Applications | PDF | HTML | 13 Dec 2022 | |
Application note | DC+ Bus Power-Supply Solution Using Bootstrap Charge Pump Technique | PDF | HTML | 06 Apr 2022 | |
Technical article | Addressing the growing needs of fault detection in high-power systems | PDF | HTML | 01 Apr 2022 | |
Application note | Isolated Undervoltage and Overvoltage Detection Circuit | PDF | HTML | 29 Mar 2022 | |
Analog Design Journal | Using isolated comparators for fault detection in electric motor drives | PDF | HTML | 14 Mar 2022 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
AMC23C14EVM — AMC23C14 evaluation module for dual, fast-response, reinforced, isolated window comparator
The AMC23C14 evaluation module (EVM) is an platform for evaluating the AMC23C14, which is an isolated window comparator with short response time. The comparator outputs are separated from the input circuitry by an isolation barrier that is certified to provide reinforced galvanic isolation of up to (...)
User guide: PDF | HTML
Not available on TI.com
Simulation model
AMC23C14 PSpice Model (Rev. B)
SBAM486B.ZIP (445 KB) - PSpice Model
Simulation model
AMC23C14 TINA-TI Reference Design
SBAM479.TSC (23163 KB) - TINA-TI Reference Design
Reference designs
TIDA-050059 — Overcurrent and overtemperature protection for solid-state relays reference design
This reference design shows how to achieve overcurrent and overtemperature protection for a solid-state relay. The reference design features the TPSI3050-Q1 5-kVRMS reinforced isolated switch driver. TPSI3050-Q1 device integrates a laminate transformer to achieve isolation while transferring signal (...)
Design guide: PDF
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
SOIC (DWV) | 8 | Ultra Librarian |
TI's Standard Terms and Conditions for Evaluation Items apply.
Ordering & quality
Add a quantity to your cart and begin the checkout process to view the options available to select lot or date codes from existing inventory.
Learn more
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.
Video series
View all videos